Gearbox oil

Prior to mount the side panel, it is wise to do some jobs ... like fill up the gearbox. It is still possible with the bodywork in place, but now it is less complicated or should I say, less gynaecological ;-) The plug can be unscrewed with a 10mm Allen key or with the 4-pan of a 3/8" ratchet.

The oil comes in a canister with a long nozzle. This helps to reach the filling hole without spilling too much.

With the gearbox oil at level, the pedals' install can be finished. This is the retaining spring from the original clutch pedal ... nanana, didn't throw it away, precious thing!

Cheers.